Operating Instruction SC 60W-A36 (01)

English 21
6.2 Sawing along a line
1. Secure the workpiece to prevent movement.
2. Position the workpiece so that the saw blade is free to rotate beneath it.
3. Check to ensure that the on/off switch on the power tool is in the “off”
position.
4. Position the front edge of the saw’s base plate on the workpiece but do
not bring the blade into contact with the workpiece.
5. Switch the tool on. → page 20
6. Guide the saw along the cutting line on the workpiece at a suitable speed.
Observe the corresponding cutting line indicator markings on the
base plate when cutting at angles of 0° and 45°.
Printed: 04.06.2018 | Doc-Nr: PUB / 5389748 / 000 / 01