Operating Instruction SC 60W-A36 (01)

English 17
5.3 Installing the saw blade
Use only saw blades of a diameter corresponding to the markings on
the saw.
1. Remove the battery. → page 15
2. Clean the mounting flange and the clamping flange.
3. Slip the mounting flange right way round on to the arbor.
4. Open the pivoting guard.
5. Insert the new saw blade.
Note the direction-of-rotation arrows on the saw blade and on the
product. They must point in the same direction.
6. Install the outer clamping flange the right way round.
7. Insert the clamping screw.
8. Insert the hex key into the saw blade clamping screw.
9. Press the spindle lock button.
10.Secure the clamping flange with the clamping screw by turning the hex
key in the direction opposite to the direction-of-rotation arrow.
◁ The spindle lock button engages.
11.Before using the power tool, check that the saw blade is correctly seated
and tightened securely.
Printed: 04.06.2018 | Doc-Nr: PUB / 5389748 / 000 / 01