Operating Instruction SC 60W-A36 (01)

16 English
5.2 Removing the saw blade
WARNING
Risk of burning injury. A hot accessory tool, clamping flange or clamping
screw and the sharp edges of the saw blade present hazards.
▶ Wear protective gloves when changing saw blades.
1. Remove the battery. → page 15
2. Insert the hex key into the saw blade clamping screw.
3. Press and hold down the spindle lock button.
4. Turn the saw blade clamping screw with the hex key until the spindle lock
button engages fully.
5. Release the clamping screw by turning the hex key in the direction of the
direction-of-rotation arrow.
6. Remove the clamping screw from the outer clamping flange.
7. Open the pivoting guard by swinging it to the side and then remove the
saw blade.
8. Fit the outer flange by turning it in the direction opposite to that of the
direction-of-rotation arrow.
Printed: 04.06.2018 | Doc-Nr: PUB / 5389748 / 000 / 01