Operating Instruction SC 60W-A36 (01)

14 English
Other system products approved for use with this product can be
found at your local Hilti Store or online at: www.hilti.group | USA:
www.hilti.com
3.6 Liion battery display
The state of charge of the Li-ion battery and malfunctions of the power tool
are indicated by the display on the Liion battery. The state of charge of
the Liion battery is displayed after pressing one of the two battery release
buttons.
Status Meaning
4 battery LEDs light up. • State of charge: 75 % to 100 %
3 battery LEDs light up. • State of charge: 50 % to 75 %
2 battery LEDs light up. • State of charge: 25 % to 50 %
1 battery LED lights up. • State of charge: 10 % to 25 %
1 battery LED flashes, the power
tool is in working order.
• State of charge: < 10 %
Battery state of charge cannot be displayed while the on/off switch is
pressed and for up to 5 seconds after releasing the on/off switch.
If the battery display LEDs blink, please observe the instructions given
in the Troubleshooting section.
4 Technical data
SC 60WA36
Rated voltage
36 V
Weight with battery (9.0 Ah)
5.84 kg (12.9 lb)
Saw blade disc thickness
0.02 in …0.06 in
(0.5 mm …1.5 mm)
Saw blade arbor size
0.6 in
(16 mm)
Cutting depth at 0°
0 in …2.37 in
(0 mm …60.3 mm)
Cutting depth at 45°
0 in …1.94 in
(0 mm …49.2 mm)
Cutting depth at 53°
0 in …1.69 in
(0 mm …42.8 mm)
No-load speed
4,000 /min
Printed: 04.06.2018 | Doc-Nr: PUB / 5389748 / 000 / 01