Operating Instruction SC 60W-A36 (01)

English 9
water pipes are present. External metal parts on the power tool can
become live, for example if you inadvertently damage electric wiring. This
presents a serious risk of electric shock.
2.4 Battery use and care
▶ Observe the special regulations and instructions applicable to the trans-
port, storage and use of Li-ion batteries.
▶ Do not expose batteries to high temperatures, direct sunlight or fire.
▶ Do not disassemble, crush or incinerate batteries and do not subject them
to temperatures over 80 °C.
▶ Do not use or charge batteries that have suffered mechanical impact,
have been dropped from a height or show signs of damage. In this case,
always contact your Hilti Service.
▶ If the battery is too hot to touch it may be defective. In this case, place the
product in a non-flammable location, well away from flammable materials,
where it can be kept under observation and allowed to cool down. In this
case, always contact your Hilti Service.
Printed: 04.06.2018 | Doc-Nr: PUB / 5389748 / 000 / 01