Use and Care Manual

6 English 2130486
*2130486*
Status Meaning
4 LEDs light. • Charge status: 75 % to 100 %
3 LEDs light. • Charge status: 50 % to 75 %
2 LEDs light. • Charge status: 25 % to 50 %
1 LED lights. • Charge status: 10 % to 25 %
1 LED blinks, the power tool is ready for use. • Charge status: < 10 %
1 LED blinks, the power tool is not ready for use. • The battery has overheated or is completely
discharged.
4 LEDs blink, the power tool is not ready for use. • The power tool is overloaded or has overheated.
Battery charge status cannot be displayed while the control switch is pressed and for up to 5 seconds
after releasing the control switch.
If the battery display LEDs blink, please observe the instructions given in the Troubleshooting section.
3.5 Items supplied
Drill / driver, side handle, operating instructions.
Spare parts, consumables and accessories approved by Hilti for use with the product can be found at
your local Hilti Center or online at: www.hilti.group
4 Technical data
Rated voltage
21.6 V
Weight
6.0 lb
(2.7 kg)
Speed 1st gear
0 /min … 310 /min
2nd gear
0 /min … 530 /min
3rd gear
0 /min … 1,210 /min
4th gear
0 /min … 2,100 /min
Torque range (15 settings)
1 ftlb
f
… 9 ftlb
f
(2 Nm … 12 Nm)
Ø drill bit (softwood)
1/16 in … 1 7/8 in
Ø drill bit (hardwood)
1/16 in … 25/32 in
Ø drill bit (metal)
1/16 in … 1/2 in
4.1 Battery
Battery operating voltage
21.6 V
Ambient temperature
14 ℉ … 140 ℉
(−10 ℃ … 60 ℃)
Storage temperature
−4 ℉ … 104 ℉
(−20 ℃ … 40 ℃)
5 Preparations at the workplace
CAUTION
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
Printed: 23.03.2018 | Doc-Nr: PUB / 5255074 / 000 / 01