Use and Care Manual

English 13
Ø drilling in con-
crete/masonry (hammer
drilling)
5/32 in …1/2 in
Ø drilling in con-
crete/masonry (hammer
drilling)
4 mm …12 mm
5 Operation
5.1 Inserting the battery
CAUTION
Risk of injury. The drill/driver may start inadvertently.
▶ Before fitting the battery, check that the drill/driver is switched off
and that the switch safety lock is activated.
CAUTION
Electrical hazard. Dirty contacts may cause a short circuit.
▶ Before inserting the battery, check to ensure that the battery terminals
and the contacts in the drill/driver are free from foreign objects.
CAUTION
Risk of injury. If the battery is not fitted correctly it may drop out and fall.
▶ Check that the battery is securely seated in the tool so that it cannot
drop out and fall, thereby presenting a hazard to other persons.
▶ Fit the battery and check that the battery is securely seated in the power
tool.
Printed: 01.02.2017 | Doc-Nr: PUB / 5329076 / 000 / 00