Use and Care Manual

2.6 The items supplied include (cardboard box versions):

1 Power tool

1 Operating instructions

2.7 Additional items required for operating the tool:

B 12/2.6 Li-Ion battery and C4⁄1250 charger.

2.8 Liion battery charge status display

LEDs light constantly LEDs blink Charge status C

LED1,2,3,4 - C≧75%

LED1,2,3 - 50 % ≦ C < 75 %

LED 1, 2 - 25 % ≦ C < 50 %

LED 1 - 10 % ≦ C < 25 %

- LED 1 C<10%

2.9 Overload and overheating protection

The power tool is equipped with an electronic protection system to prevent

overloading and overheating. The power tool switches itself off automatically

in the event of overloading and overheating. After releasing the control

switch, the power tool may not restart immediately when the switch is

pressed again (while the power tool is cooling down).

NOTE

Overloading or overheating are not indicated by the LEDs on the battery.

3 Insert tools, accessories

Designation Short designation

Charger for Li-ion batteries C 4/12-50

Battery B12/2.6LiIon

Belt hook (optional)

Designation Description

Keyless chuck clamping range ∅ 0.8…10 mm (0.03…0.39")

Drilling diameter range in wood

(soft)

∅ 0.8…14 mm (0.03…0.55")

Printed: 24.03.2014 | Doc-Nr: PUB / 5174908 / 000 / 00