Use and Care Manual

***** For internal use only ***** 27.07.2016 / 13:24:49 - H2\DOK-Projekt\System\SIW_22T-A-G1\ENU\SIW22TA_P3
11
5.5 Removing the socket
SIW 22T-A
1
/
2
"
1. Set the forward/reverse switch to the middle position or remove the battery from the power tool.
2. Pull the accessory tool off the square drive.
5.6 Removing the socket
SIW 22T-A
3
/
4
"
1. Set the forward/reverse switch to the middle position or remove the battery from the power tool.
2. Remove the O-ring from the groove in the socket.
3. Pull out the locking pin.
4. Remove the socket from the square drive spindle of the tool.
5. Fit the locking pin.
6. Fit the securing O-ring to the socket.
6 Care and maintenance
6.1 Care and maintenance of cordless tools
WARNING
Danger of electric shock! Carrying out care and maintenance while the battery is fitted presents a
risk of serious physical injury and burning injury.
▶ Always remove the battery before carrying out all care and maintenance tasks.
Care and maintenance of the tool
• Carefully remove any dirt that may be adhering to parts.
Printed: 27.07.2016 | Doc-Nr: PUB / 5293233 / 000 / 00