Use and Care Manual

4
+
Belt hook (optional)
§
Release buttons with additional function
(charge status display activation)
/
Charge state and fault display (Li-ion
battery)
3.2 Intended use
The product described is a hand-held cordless drill / driver. It is designed to be used for driving and removing
screws and for drilling in steel, wood and plastic.
▶ Use this product only with Hilti Liion batteries of the B18 / B22 series.
▶ Use only the Hilti battery chargers of the C4/36 series for these batteries.
3.3 Items supplied
Drill / driver, operating instructions.
4 Technical data
4.1 Technical data
SFC-18A SFC -A22
Rated voltage
21.6 V 21.6 V
Weight in accordance with EPTA procedure 01/2003
1.7 kg
(3.7 lb)
1.7 kg
(3.7 lb)
Speed in 1st gear
0 /min … 600 /min 0 /min … 600 /min
Speed in 2nd gear
0 /min …
1,800 /min
0 /min …
1,800 /min
Torque (max.)
28 Nm 28 Nm
Torque range (15 settings)
1.5 Nm … 10 Nm 1.5 Nm … 10 Nm
4.2 Noise and vibration information
SFC -A22
Sound power level L
WA
80 dB
Screwdriving without hammer action a
h
1 m/s²
Uncertainty for screwdriving without hammer action (K)
1.5 m/s²
Drilling in metal a
h,D
21 m/s²
Uncertainty for screwdriving without hammer action
drilling in metal (K)
1.5 m/s²
5 Operation
5.1 Inserting the battery 2
CAUTION
Risk of injury. The drill/driver may start inadvertently.
▶ Before fitting the battery, check that the drill/driver is switched off and that the switch safety lock
is activated.
CAUTION
Electrical hazard. Dirty contacts may cause a short circuit.
▶ Before inserting the battery, check to ensure that the battery terminals and the contacts in the
drill/driver are free from foreign objects.
Printed: 27.07.2016 | Doc-Nr: PUB / 5293248 / 000 / 00