Use and Care Manual

1
2
Obligation signs
Wear a hard
hat
Wear eye
protection
Wear
breathing
protection
Wear ear
protection
Wear
protective
gloves
Symbols
Read the
operating
instructions
before use
Return waste
material for
recycling.
Drilling, 1st
gear
Drilling, 2nd
gear
Amps Hertz Volts Watts
Alternating
current
Double
insulated
Location of identification data on the power tool
The type designation, item number, year of man-
ufacture and technical status can be found on the
type identification plate on the machine or tool. The
serial no. can be found on the underside of the motor
housing. Make a note of this data in your operating
instructions and always refer to it when making an
enquiry to your Hilti representative or service depart-
ment.
Type:
Serial no.:
2. Description
2.1 Use of the product as directed
The power tool is a hand‐held, mains‐powered electric drill for drilling in wood and metal and for screwdriving.
Under certain conditions, the power tool is also suitable for mixing (see “Applications”).
The working environment may be as follows: construction site, workshop, renovation, conversion or new
construction, where the types of work listed above may be carried out.
The power tool may be operated only when connected to a power supply providing a voltage and frequency in
compliance with the information given on its type identification plate.
Modification of the power tool or tampering with its parts is not permissible.
The power tool is designed for professional use and may be operated, serviced and maintained only by trained,
authorized personnel. This personnel must be informed of any special hazards that may be encountered. The
power tool and its ancillary equipment may present hazards when used incorrectly by untrained personnel or
when used not as directed.
To avoid the risk of injury, use only genuine Hilti accessories and insert tools.
Observe the information printed in the operating instructions concerning operation, care and maintenance.
en
18