Operating Instruction SF 6(H)-22 (03)

8 English 2275218
*2275218*
SF 6-22 SF 6H-22
Speed 2nd gear
0 /min … 2,000 /min 0 /min … 2,000 /min
Torque (soft joint)
≤ 65 Nm ≤ 65 Nm
Impact speed
•/• 36,000 /min
Ambient temperature for operation
−17 ℃ … 60 ℃
(1 ℉ … 140 ℉)
−17 ℃ … 60 ℃
(1 ℉ … 140 ℉)
Storage temperature
−20 ℃ … 70 ℃
(−4 ℉ … 158 ℉)
−20 ℃ … 70 ℃
(−4 ℉ … 158 ℉)
4.1 Battery
Battery operating voltage
21.6 V
Weight, battery
See the end of these
operating instructions
Ambient temperature for operation
−17 ℃ … 60 ℃
(1 ℉ … 140 ℉)
Storage temperature
−20 ℃ … 40 ℃
(−4 ℉ … 104 ℉)
Battery charging starting temperature
−10 ℃ … 45 ℃
(14 ℉ … 113 ℉)
4.2 Accessory tools – permissible diameters
SF 6-22 SF 6H-22
Ø range of keyless chuck
1.5 mm … 13 mm
(0.06 in … 0.5 in)
1.5 mm … 13 mm
(0.06 in … 0.5 in)
Ø wood drill bits (hardwood)
1.5 mm … 20 mm
(0.06 in … 0.8 in)
1.5 mm … 20 mm
(0.06 in … 0.8 in)
Ø wood drill bits (softwood)
1.5 mm … 32 mm
(0.06 in … 1.3 in)
1.5 mm … 32 mm
(0.06 in … 1.3 in)
Ø drill bits for metal
1.5 mm … 13 mm
(0.06 in … 0.5 in)
1.5 mm … 13 mm
(0.06 in … 0.5 in)
Ø drilling in concrete/masonry (hammer-action
drilling)
•/• 4 mm … 12 mm
(0.2 in … 0.5 in)
5 Preparations at the workplace
WARNING
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.1 Charging the battery
1. Before charging the battery, read the operating instructions for the charger.
2. Make sure that the contacts on the battery and the contacts on the charger are clean and dry.
3. Use an approved charger to charge the battery. → page 6