Operating Instruction SPN 6-22 (02)

8 English 2331867
*2331867*
4 Technical data
The nibbler comes with the SPNCN, SPNRN or SPNRL accessory tool as standard. The individual
accessory tools are also available as optional accessories and are compatible with every as-delivered
version of the power tool.
SPN 6-22
SPNCN SPNRN SPNRL
Rated voltage
21.6 V 21.6 V 21.6 V
Weight without battery
2 kg
(4 lb)
2 kg
(4 lb)
2.2 kg
(4.9 lb)
Stroke rate at idle speed
620 /min …
1,370 /min
620 /min …
1,370 /min
620 /min …
1,370 /min
Starting hole diameter
17 mm
(0.7 in)
24 mm
(0.9 in)
24 mm
(0.9 in)
Smallest radius for curved cut-outs
4.0 mm
(0.16 in)
•/• •/•
Radius
•/• 50 mm
(2.0 in)
50 mm
(2.0 in)
Cutting track width
8.0 mm
(0.31 in)
5.0 mm
(0.20 in)
5.0 mm
(0.20 in)
Permissible steel thickness, steel up to
400 N⁄mm²
2.0 mm / 14 ga
(0.08 in / 14 ga)
2.0 mm / 14 ga
(0.08 in / 14 ga)
2.0 mm / 14 ga
(0.08 in / 14 ga)
Permissible steel thickness, steel up to
600 N⁄mm²
1.5 mm / 16 ga
(0.06 in / 16 ga)
1.5 mm / 16 ga
(0.06 in / 16 ga)
1.5 mm / 16 ga
(0.06 in / 16 ga)
Permissible steel thickness, steel up to
800 N⁄mm²
1.0 mm / 20 ga
(0.04 in / 20 ga)
1.0 mm / 20 ga
(0.04 in / 20 ga)
1.0 mm / 20 ga
(0.04 in / 20 ga)
Permissible material thickness, aluminum
up to 250 N⁄mm²
2.5 mm / 10 ga
(0.10 in / 10 ga)
3.0 mm / 9 ga
(0.12 in / 9 ga)
3.0 mm / 9 ga
(0.12 in / 9 ga)
4.1 Battery
Battery operating voltage
21.6 V
Weight, battery
See the end of these operating in-
structions
Ambient temperature for operation
−17 ℃ … 60 ℃
(1 ℉ … 140 ℉)
Storage temperature
−20 ℃ … 40 ℃
(−4 ℉ … 104 ℉)
Battery charging starting temperature
−10 ℃ … 45 ℃
(14 ℉ … 113 ℉)
5 Preparations at the workplace
WARNING
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.1 Charging the battery
1. Before charging the battery, read the operating instructions for the charger.
2. Make sure that the contacts on the battery and the contacts on the charger are clean and dry.
3. Use an approved charger to charge the battery. → page 6