Operating Instruction NCR 120-22

8 English 2321722
*2321722*
3.7 Selecting the crimping dies
The tables to assist with selecting the crimping dies to be used can be found at the end of these operating
instructions.
4 Technical data
NCR 120-22 NCR 120C-22
Rated voltage
21.6 V 21.6 V
Weight without battery
16.3 lb
(7.4 kg)
16.3 lb
(7.4 kg)
Max. crimping / pressing force
27,000 lb
f
(120 kN)
27,000 lb
f
(120 kN)
Crimping / pressing time
8 s … 9 s 8 s … 9 s
Max. permissible crimping capacity Cu
750 MCM 750 MCM
Al
750 MCM 750 MCM
Storage temperature
−4 ℉ … 158 ℉
(−20 ℃ … 70 ℃)
−4 ℉ … 158 ℉
(−20 ℃ … 70 ℃)
Ambient temperature for operation
1 ℉ … 140 ℉
(−17 ℃ … 60 ℃)
1 ℉ … 140 ℉
(−17 ℃ … 60 ℃)
4.1 Battery
Battery operating voltage
21.6 V
Weight, battery
See the end of these
operating instructions
Ambient temperature for operation
1 ℉ … 140 ℉
(−17 ℃ … 60 ℃)
Storage temperature
−4 ℉ … 104 ℉
(−20 ℃ … 40 ℃)
Battery charging starting temperature
14 ℉ … 113 ℉
(−10 ℃ … 45 ℃)
5 Preparations at the workplace
WARNING
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or before changing accessories.
WARNING
Risk of injury by incorrectly positioned crimping dies! Incorrectly positioned crimping dies can fly out like
projectiles and cause injuries.
▶ Before and during the crimping operation, make sure that the crimping dies are correctly positioned.
CAUTION
Risk of injury! The accessory tool may be hot and/or have sharp edges.
▶ Wear protective gloves when changing the accessory tool.
▶ Never lay down a hot accessory tool on a flammable surface.
Observe the safety instructions and warnings in this documentation and on the product.