Use and Care Manual

2
June 2018
As global leaders in chemical anchoring systems, Hilti has provided threaded rod for anchoring
applications in materials such as concrete and masonry for many years.
As your partner, we offer a broad portfolio of high quality pre-cut and custom cut-to-length Hilti
anchor rods in thread diameters up to 2 ½ inches that in conjunction with the Hilti injectable mortars
and adhesive capsules provide reliable and high performing fastening points, and enable the installer
to complete chemical anchoring applications efficiently, hassle-free, without compromising the
budget.
Hilti HIT-Z Anchor rod
For use with Hilti HIT-HY 200 injectable mortar, the Hilti HIT-Z
anchor rod provides the ultimate in safety and load capacity
combined with up to 60% faster installation due to zero-
cleaning SafeSet Technology*.
* Zero-cleaning with SafeSet Technology with the Hilti HIT-Z anchor rod is currently for use
at a base material temperature above 41 °F (+5 °C). For use below 41 °F (+5 °C) and for full
installation procedures refer to the product instructions for use on the product packaging or
contact Hilti.
Hilti HAS Anchor rod
Broad portfolio of eight different material and coating types
including high-strength, hot-dipped galvanized, and stainless
steel for the demand of increased performance and usability
with capsule systems.
New enhanced carbon steel HAS rod program
All carbon steel HAS rods now meet the requirements of the
ASTM F1554, which allows engineers to design ductile fastening
points with predictable steel failure for seismic applications in
the three most common and relevant steel grades 36, 55 and
105.
The indication of the steel grade in the head marking and the
product name simplifies the selection and identification of
the right anchor rods. Included matching high quality nuts
and washers will help the installer get the job done quickly,
efficiently, and correctly.