Use and Care Manual
14
June 2018
EXTENDED HILTI ANCHOR ROD PROGRAM
ORDERING INFORMATION
The following threaded rod ordering information is for the Hilti extended rod program according to the material specifications on page 2.
Extended rod offering
Material
Electro plated Hot dip galvanized Stainless steel
Min.
length
in.
Max.
length
in.
ASTM F1554
Grade 36
ASTM F1554
Grade 55
ASTM F1554
Grade 105
ASTM F1554
Grade 36
ASTM F1554
Grade 55
ASTM F1554
Grade 105
SS304 SS316
Nominal anchor diameter (in.)
1/4 2 144
3/8
1
2 144
1/2 2 144
5/8 3 144
3/4 4 144
7/8 4 144
1 5 144
1-1/8 6 144
1-1/4 6 144
1-1/2 8 144
1-3/4 9 144
2 11 144
2-1/4 12 144
2-1/2 13 144
= typical lead time 2–4 working days plus shipping
2
= available but longer lead time
1
3/8-inch dia. threaded rods are not included in the ASTM F1554 standard. Hilti 3/8-inch dia. HAS-V, HAS-E, and HAS-E-B (incl. HDG) threaded rods meet the chemical composition and mechanical
property requirements of ASTM F1554.
2
up to following quantities: 1/4” to 3/4” > 250 pieces, 7/8” to 1-1/4” > 100 pieces, 1-1/2” to 2-1/2” > 50 pieces. Bigger quantities contact Hilti for lead time.
Hilti threaded rods in the Hilti Extended Anchor Rod Program are
stamped on the end to show grade of steel.
H
V
HAS-V-36 / HAS-V-36 HDG
ASTM F1554, Grade 36
H
E
HAS-E-55 / HAS-E-55 HDG
ASTM F1554, Grade 55
H
B
HAS-B-105 / HAS-B-105 HDG
ASTM A193, Grade B7
ASTM F1554, Grade 105
H
R1
SS304
HAS-R 304SS
1/4-in. ASTM A193 Grade B8, Class 1
3/8-in. to 5/8-in. AISI Type 304 ASTM F593 CW1
3/4-in. to 1-in. AISI Type 304 ASTM F593 CW2
1-1/8-in. to 2-in. ASTM A193 Grade B8, Class 1
H
R2
SS316
HAS-R 316SS
1/4-in. ASTM A193 Grade B8M, Class 1
3/8-in. to 5/8-in. AISI Type 316 ASTM F593 CW1
3/4-in. to 1-in. AISI Type 316 ASTM F593 CW2
1-1/8-in. to 2-in. ASTM A193 Grade B8M, Class 1
TWO END CUT OPTIONS AVAILABLE
Angle cut*
*Not available for HAS-V-36 and HAS-V-36 HDG.
Straight, or flat cut