Operating Instruction BX 3-ME (02)
Table Of Contents
- Original operating instructions
- 1 Information about the documentation
- 2 Safety
- 3 Description
- 4 Technical data
- 5 Preparing the tool for use
- 6 Operation
- 7 Care and maintenance
- 8 Transport and storage of cordless tools
- 9 Troubleshooting
- 10 Disposal
- 11 Manufacturer’s warranty
- 12 FCC statement (applicable in US) / IC statement (applicable in Canada)
English 13
6.1.1 Retracting the support leg
CAUTION
Risk of pinching the fingers! When folding the support leg back there is a risk of trapping and pinching the
fingers between the support leg and the casing of the tool.
▶ Hold the fastening tool by the grip when extending/retracting the support leg.
1. Push against the support leg to release it from its engaged position.
2. Pivot the support leg back through about 180°.
3. Push against the support leg from below until it engages in the retracted position.
6.1.2 Extending the support leg
CAUTION
Risk of pinching the fingers! When folding the support leg back there is a risk of trapping and pinching the
fingers between the support leg and the casing of the tool.
▶ Hold the fastening tool by the grip when extending/retracting the support leg.
1. Push against the support leg to release it from its engaged position.
2. Pivot the support leg forward through about 180°.
3. Push against the support leg from below until it engages in the extended position.
6.2 Switching the fastening tool on/off
6.2.1 Switching on the fastening tool
WARNING
Risk of injury! Pressing the nosepiece of the fastening tool against a part of the body may lead to serious
injury due to inadvertent firing and release of a fastener.
▶ Never press the nosepiece of the tool against your hand or any other part of the body.
Printed: 19.07.2018 | Doc-Nr: PUB / 5377202 / 000 / 02