Operating Instruction BX 3-ME (02)

English 9
Nail diameter
0.12 in
(3.0 mm)
Magazine capacity
20 nails
Compression stroke
0.5 in
(12 mm)
Contact pressure
11 lb
f
…16 lb
f
(50 N …70 N)
Application temperature (ambient temperature)
5 ℉ …122 ℉
(−15 ℃ …50 ℃)
Recommended maximum fastening rate
650/h
Rated voltage
21.6 V
Battery operating voltage
21.6 V
4.2 Battery
Battery operating voltage
21.6 V
Ambient temperature
14 ℉ …140 ℉
(−10 ℃ …60 ℃)
Storage temperature
−4 ℉ …104 ℉
(−20 ℃ …40 ℃)
5 Preparing the tool for use
5.1 Charging the battery
1. Remove the battery. → page 10
2. Charge the battery in accordance with the information provided in the operating instructions for the
charger.
5.2 Inserting the battery
In order to achieve maximum battery lifetime, replace the discharged battery with a fully charged
battery as soon as there is a clearly perceptible drop in battery performance.
1. Check that the contacts on the battery and on the tool are free of foreign matter.
2. Insert the battery, making sure that it engages with an audible click.
◁ When you insert the battery the charge status LEDs show briefly.
CAUTION
A falling battery presents a hazard. If the battery is not secured correctly it may drop out and fall while the
work is in progress.
▶ Always check that the battery is securely seated.
Printed: 19.07.2018 | Doc-Nr: PUB / 5377202 / 000 / 02