Operating Instruction SL 2-A12 (01), SL 2-A22 (1)

6 English
4 Technical data
4.1 Technical data
SL 2-A12 SL 2-A22
Voltage
10.8 V 21.6 V
Brightness
500 lm 500 lm
Weight
0.65 kg
(1.43 lb)
1.3 kg
(2.9 lb)
5 Operation
5.1 Preparations at the workplace
CAUTION
Risk of injury! Inadvertent starting of the product.
▶ Remove the battery before making any adjustments to the power tool or before
changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.2 Inserting the battery
CAUTION
Electrical hazard. Dirty contacts may cause a short circuit.
▶ Before inserting the battery, check to ensure that the battery terminals and the
contacts on the product are free from foreign objects.
CAUTION
Risk of injury. If the battery is not fitted correctly it may drop out and fall.
▶ Check that the battery is securely seated in the product so that it cannot drop
out and fall, thereby presenting a hazard to other persons.
▶ Insert the battery and check that the battery is securely seated in the device.
5.3 Removing the battery
1. Press both release buttons.
2. Pull the battery to the rear and out of the product.
5.4 Pivoting the head of the lamp
1. Pull out the retractable hook.
Note
When you suspend the lamp using the retractable hook, check the load-bearing
capacity of the point from which the lamp is suspended.
2. Pivot the head of the lamp upwards.
Printed: 21.04.2017 | Doc-Nr: PUB / 5346584 / 000 / 00