Operating Instruction SID 4-A22 (01)

*2145526*
2145526 English 9
Rated speed under no load Setting III
0 /min … 2,700 /min
Impact speed
≤ 3,500 bpm
Torque adjustment
3 settings
Large standard bolts
M8 to M16
Large high-strength bolts
M6 to M12
Socket/bit drive
1
/
4
″ hex. socket with
locking ring
Storage temperature
−20 ℃ … 70 ℃
Ambient temperature for operation
−17 ℃ … 60 ℃
4.2 Noise information and vibration values in accordance with EN
62841
The sound pressure and vibration values given in these instructions were
measured in accordance with a standardized test and can be used to
compare one power tool with another. They can also be used for a
preliminary assessment of exposure.
The data given represent the main applications of the power tool. However,
if the power tool is used for different applications, with different accessory
tools, or is poorly maintained, the data can vary. This can significantly
increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times
when the tool is switched off, or when it is running but not actually being used
for a job. This can significantly reduce exposure over the total workingperiod.
Identify additional safety measures to protect the operator from the effects
of noise and/or vibration, for example: maintaining the power tool and
accessory tools, keeping the hands warm, organization of work patterns.
Noise information
Sound (power) level (L
WA
)
98 dB(A)
Uncertainty for the sound power level (K
WA
)
3 dB(A)
Emission sound pressure level (L
pA
)
87 dB(A)
Uncertainty for the sound pressure level (K
pA
)
3 dB(A)
Total vibration
Vibration emission value when tightening
screws/bolts and nuts of the maximum permitted
size (a
h
)
12 m/s²
Uncertainty for tightening screws/bolts and nuts of
the maximum permitted size
1.5 m/s²
Printed: 14.10.2019 | Doc-Nr: PUB / 5293911 / 000 / 06