Operating Instruction SF 6-A22/SF 6H-A22 (02)
Table Of Contents
- Original operating instructions
- 1 Information about the documentation
- 2 Safety
- 3 Description
- 4 Technical data
- 5 Operation
- 5.1 Inserting the battery
- 5.2 Removing the battery
- 5.3 Charging the battery
- 5.4 Installing the side handle
- 5.5 Fitting the belt hook (optional)
- 5.6 Installing Hilti bit holder (optional)
- 5.7 Hilti Installing the retaining strap (optional)
- 5.8 Selecting the gear
- 5.9 Setting forward or reverse rotation
- 5.10 Inserting / removing the accessory tool
- 5.11 Drilling
- 5.12 Hammer-action drilling
- 5.13 Screwdriving
- 5.14 Switching on
- 5.15 Switching off
- 6 Care and maintenance
- 7 Transport and storage of cordless tools
- 8 Troubleshooting
- 9 Disposal
- 10 Manufacturer’s warranty
- Notice d'utilisation originale
- 1 Indications relatives à la documentation
- 2 Sécurité
- 3 Description
- 4 Caractéristiques techniques
- 5 Utilisation
- 5.1 Introduction de l'accu
- 5.2 Retrait de l'accu
- 5.3 Recharge de l'accu
- 5.4 Montage de la poignée latérale
- 5.5 Montage de la patte d'accrochage (en option)
- 5.6 Montage du porte-embout Hilti (en option)
- 5.7 Montage de la sécurité anti-chute Hilti (en option)
- 5.8 Choix du régime
- 5.9 Sélection du sens de rotation droite / gauche
- 5.10 Mise en place/Retrait de l'outil amovible
- 5.11 Perçage
- 5.12 Perçage à percussion
- 5.13 Vissages
- 5.14 Mise en marche
- 5.15 Arrêt
- 6 Nettoyage et entretien
- 7 Transport et stockage des appareils sur accu
- 8 Aide au dépannage
- 9 Recyclage
- 10 Garantie constructeur
- Manual de instrucciones original
- 1 Información sobre la documentación
- 2 Seguridad
- 3 Descripción
- 4 Datos técnicos
- 5 Manejo
- 5.1 Colocación de la batería
- 5.2 Extracción de la batería
- 5.3 Carga de la batería
- 5.4 Montaje de la empuñadura lateral
- 5.5 Montaje del colgador de cinturón (opcional)
- 5.6 Montaje del soporte para puntas de Hilti (opcional)
- 5.7 Montaje de la protección en caso de caída de Hilti (opcional)
- 5.8 Selección de velocidad
- 5.9 Ajuste del giro a la derecha o a la izquierda
- 5.10 Introducción y extracción del útil de inserción
- 5.11 Taladrar
- 5.12 Taladrar con percusión
- 5.13 Atornillado
- 5.14 Conexión
- 5.15 Desconexión
- 6 Cuidado y mantenimiento
- 7 Transporte y almacenamiento de las herramientas alimentadas por batería
- 8 Ayuda en caso de averías
- 9 Reciclaje
- 10 Garantía del fabricante
- Manual de instruções original
- 1 Indicações sobre a documentação
- 2 Segurança
- 3 Descrição
- 4 Características técnicas
- 5 Utilização
- 5.1 Colocar a bateria
- 5.2 Retirar a bateria
- 5.3 Carregar a bateria
- 5.4 Montagem do punho auxiliar
- 5.5 Montar o gancho de cinto (opcional)
- 5.6 Montar o suporte de bit Hilti (opcional)
- 5.7 Montar o dispositivo de segurança Hilti (opcional)
- 5.8 Seleccionar a velocidade
- 5.9 Ajustar a rotação à direita ou à esquerda
- 5.10 Colocar/retirar o acessório
- 5.11 Furar
- 5.12 Furar com percussão
- 5.13 Aparafusar
- 5.14 Ligar
- 5.15 Desligar
- 6 Conservação e manutenção
- 7 Transporte e armazenamento de ferramentas de baterias recarregáveis
- 8 Ajuda em caso de avarias
- 9 Reciclagem
- 10 Garantia do fabricante
10 English 2231427
*2231427*
4.1 Battery
Battery operating voltage
21.6 V
Ambient temperature for operation
1 ℉ … 140 ℉
(−17 ℃ … 60 ℃)
Storage temperature
−4 ℉ … 104 ℉
(−20 ℃ … 40 ℃)
Battery charging starting temperature
14 ℉ … 113 ℉
(−10 ℃ … 45 ℃)
4.2 Accessory tools – permissible diameters
Ø range of keyless chuck
1/16 in … 1/2 in
Ø range of keyless chuck
1.5 mm …
13 mm
Ø wood drill bits (hardwood)
1/16 in … 3/4 in
Ø wood drill bits (hardwood)
1.5 mm …
20 mm
Ø wood drill bits (softwood)
1/16 in …
1 1/4 in
Ø wood drill bits (softwood)
1.5 mm …
32 mm
Ø drill bits for metal
1/16 in … 1/2 in
Ø drill bits for metal
1.5 mm …
13 mm
Ø drilling in concrete/masonry (hammer-action
drilling)
5/32 in … 1/2 in
Ø drilling in concrete/masonry (hammer-action
drilling)
4 mm … 12 mm
5 Operation
5.1 Inserting the battery
CAUTION
Risk of injury by short circuit or falling battery!
▶ Before inserting the battery, make sure that the contacts on the battery
and the contacts on the product are free of foreign matter.
▶ Make sure that the battery always engages correctly.
1. Charge the battery fully before using it for the first time.
2. Push the battery into the battery holder until it engages with an audible
click.
3. Check that the battery is seated securely.
Printed: 19.08.2019 | Doc-Nr: PUB / 5467429 / 000 / 01