Operating Instruction SF 6-A22/SF 6H-A22 (02)

8 English 2231427
*2231427*
3 Description
3.1 Overview 1
@
Keyless chuck
;
Torque and operating mode
selector ring
=
Side handle
%
Gear selector switch
&
Forward/reverse selector
switch with safety lock
(
Control switch (with electronic
speed control)
)
Grip
+
Light to illuminate the work
area
§
Belt hook (optional)
/
Charge-status and fault indi-
cator (Li-ion battery)
:
Battery release button
∙
Battery
3.2 Intended use
The product described is a hand-held cordless drill/driver. It is designed for
drilling in steel, wood, plastic, cellular concrete and masonry and for driving
and removing screws.
▶ Use only Hilti Liion batteries of the B 22 series with this product.
▶ Use only the Hilti battery chargers of the C4/36 series to charge these
batteries.
3.3 Items supplied
Drill / driver, side handle, operating instructions.
Other system products approved for use with this product can be found at
your local Hilti Store or online at: www.hilti.group | USA: www.hilti.com
3.4 Lithiumion battery status display
The Li-ion battery state of charge and malfunctions of the power tool are
indicated by the display on the Liion battery. The Liion battery state of
charge is displayed after pressing one of the two battery release buttons.
Status Meaning
4 LEDs light. State of charge: 75 % to 100 %
3 LEDs light. State of charge: 50 % to 75 %
2 LEDs light. State of charge: 25 % to 50 %
1 LED lights. State of charge: 10 % to 25 %
1 LED blinks. State of charge: < 10 %
1 LED flashes, the power tool is not
in working order.
The battery has overheated or is
completely discharged.
4 LEDs flash, the power tool is not
in working order.
The power tool is overloaded or has
overheated.
Printed: 19.08.2019 | Doc-Nr: PUB / 5467429 / 000 / 01