Operating Instruction SBT 4-A22 (01)

*2184702*
2184702 English 7
3.3 Li-ion battery state of charge display
The charge state of the Li-ion battery and malfunctions of the power tool are
indicated by the display on the Liion battery. The charge state of the Liion
battery is displayed after pressing one of the two battery release buttons.
Status Meaning
4 LEDs light. State of charge: 75 % to 100 %
3 LEDs light. State of charge: 50 % to 75 %
2 LEDs light. State of charge: 25 % to 50 %
1 LED lights. State of charge: 10 % to 25 %
1 LED blinks, the power tool is
ready for use.
State of charge: < 10 %
1 LED blinks, the power tool is not
ready for use.
The battery has overheated or is
completely discharged.
4 LEDs blink, the power tool is not
ready for use.
The power tool is overloaded or has
overheated.
Battery charge state cannot be displayed while the control switch is
pressed and for up to 5 seconds after releasing the control switch. If
the battery display LEDs blink, please observe the instructions given in
the Troubleshooting section.
3.4 Items supplied
Drill / driver, operating instructions.
• Other system products approved for use with this product can be found
at your local Hilti Center or online at: www.hilti.group
4 Technical data
4.1 Drill/driver
Rated voltage
21.6 V
Weight including battery B22⁄8.0
6.8 lb
Speed 1st gear
0 /min …
370 /min
2nd gear
0 /min …
2,140 /min
Torque (soft joint)
≤ 37 ftlb
f
Torque range (15 settings)
1 ftlb
f
… 9 ftlb
f
Ø drill bit (metal)
1/16 in … 1/2 in