Operating Instruction SID 8-A (01)

*2153706*
2153706 English 9
4 Technical data
4.1 Impact screwdriver
Rated voltage
21.6 V
DC
Weight including battery B22⁄8.0
8.2 lb
Rated speed under no load
2,200 /min
Torque
369 ftlb
f
Storage temperature
−4 ℉ … 158 ℉
Ambient temperature for operation
1 ℉ … 140 ℉
4.2 Battery
Battery operating voltage
21.6 V
Ambient temperature for operation
1 ℉ … 140 ℉
Storage temperature
−4 ℉ … 104 ℉
Battery charging starting temperature
14 ℉ … 113 ℉
5 Preparations at the workplace
CAUTION
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or
before changing accessories.
Observe the safety instructions and warnings in this documentation and on
the product.
5.1 Charging the battery
1. Before charging the battery, read the operating instructions for the
charger.
2. Make sure that the contacts on the battery and the contacts on the
charger are clean and dry.
3. Use an approved charger to charge the battery.
5.2 Inserting the battery
CAUTION
Risk of injury by short circuit or falling battery!
▶ Before inserting the battery, make sure that the contacts on the battery
and the contacts on the product are free of foreign matter.
▶ Make sure that the battery always engages correctly.
1. Charge the battery fully before using it for the first time.
Printed: 14.10.2019 | Doc-Nr: PUB / 5293229 / 000 / 02