Use and Care Manual

***** For internal use only ***** 11.08.2016 / 12:48:13 - H2\DOK-Projekt\System\SD_5000-A22\ENU\SD4500_P3

5.3 Fitting the belt hook in the alternative position

1. Press both battery release buttons simultaneously and pull the battery out of the screwdriver.

2. Unscrew both belt hook retaining screws.

3. Bring the belt hook and threaded piece into place on the other side of the tool.

4. Reinsert and tighten the two retaining screws.

5.4 Working safely with the belt hook and universal hook

▶ Before beginning work, make sure that the belt hook and universal hook are securely attached to the

screwdriver.

▶ Use the universal hook only when necessary. Lay the screwdriver down in a safe place when it is not in

use for a long period.

5.5 Forward / reverse

Note

The control switch is locked when the forward / reverse switch is in the middle position (safety lock).

▶ Set the forward / reverse selector switch to forward or reverse rotation.

Printed: 11.08.2016 | Doc-Nr: PUB / 5295850 / 000 / 00