Use and Care Manual

Modification of the power tool or tampering with its parts is not permissible.

The working environment may be as follows: construction site, workshop, renovation, conversion or new

construction.

2.2 Chuck

¼" hex. socket

2.3 Switch

Control switch for smooth speed control

Lockbutton for continuous operation

Forward / reverse switch

2.4 Lubrication

Grease lubrication

2.5 Grip

Vibration-absorbing ergonomic grip (in-line grip)

2.6 Power tool overloading and overheating indicator

The power tool is equipped with an electronic protection system to prevent overloading and overheating. The

power tool switches itself off automatically in the event of overloading and overheating. After releasing the

control switch, the power tool may not restart immediately when the switch is pressed again (while the power

tool is cooling down).

LEDs light constantly LEDs blink Power tool status

LED 1,2,3,4 Power tool overloaded or

overheated

2.7 The items supplied include (cardboard box versions):

1 Power tool

1STತDC guard

1 Operating instructions

2.8 Li

ತ

ion battery charge status

LEDs light constantly LEDs blink Charge status C

LED 1,2,3,4

C ฺ 75 %

LED 1,2,3

50 % ู C < 75 %

LED 1,2

25 % ู C < 50 %

LED 1

10 % ู C < 25 %

LED 1

C < 10 %

LED 1 Battery overheated