Operating Instruction ST 1800 A22 (01)

English 17
▶ Switch the tool on.
5.10 Switching on in sustained operating mode
The lockbutton can be pressed in while the control switch is pressed.
The metal construction screwdriver then runs in sustained operating
mode. The lockbutton makes the tool less tiring to use as the control
switch does not have to be constantly pressed.
▶ Switch on in sustained operating mode.
5.11 Switching off after sustained operation
In order to be able to switch off from sustained operating mode quickly
at any time, keep your hand close to the control switch. Pressing the
control switch again causes the lockbutton to jump back into its original
position.
▶ Switch off after sustained operation.
Printed: 05.06.2019 | Doc-Nr: PUB / 5293030 / 000 / 04