Operating Instruction ST 1800 A22 (01)

16 English
5.7 Setting the torque
▶ Set the desired torque.
5.8 Safe operation
WARNING
Electric shock A fastener coming into contact with a concealed electric
cable may result in electric shock.
▶ Never use the depth gauge or chuck as a gripping area.
Always hold the tool by the grip and/or with the hands on plastic parts
of the casing (in-line grip).
▶ Always hold the tool by the grip and/or with the hands on plastic parts of
the casing.
5.9 Switching on
The metal construction screwdriver must be pressed lightly against the
working surface as it will otherwise not start (for safety reasons). The
running speed can be controlled smoothly right up to maximum speed
by varying how far the control switch is pressed in.
Printed: 05.06.2019 | Doc-Nr: PUB / 5293030 / 000 / 04