Operating Instruction ST 1800 A22 (01)

14 English
5.3 Removing the battery
▶ Remove the battery.
5.4 Fitting / removing the depth gauge (optional)
When driving screws with a sealing washer, use a depth gauge suitable
for the diameter of the sealing washer (accessory). When the depth
gauge is correctly adjusted the screw seal will be correctly compressed.
The depth gauge is attached to the metal construction screwdriver by
way of a snap-on connection and can be simply pulled off or pushed on.
▶ Fit the depth gauge.
5.5 Using the protective cap
When the depth gauge is not fitted, the guard protects the depth gauge
holder from dirt and damage.
Printed: 05.06.2019 | Doc-Nr: PUB / 5293030 / 000 / 04