Operating Instruction ST 1800 A22 (01)

12 English
Battery charge state cannot be displayed while the control switch is
pressed and for up to 5 seconds after releasing the control switch. If
the battery display LEDs blink, please observe the instructions given in
the Troubleshooting section.
4 Technical data
4.1 Cordless metal screwdriver
Rated voltage
21.6 V
DC
Weight
6.8 lb
(3.1 kg)
Rated speed under no load
33.3 Hz
(2,000 /min)
Torque
9 ftlb
f
(12 Nm)
Socket/bit drive
1
/
4
″ hex. socket
with locking ring
Operating temperature
1 ℉ … 140 ℉
(−17 ℃ …
60 ℃)
Storage temperature range (without battery)
−4 ℉ … 158 ℉
(−20 ℃ …
70 ℃)
4.2 Battery
Battery operating voltage
21.6 V
Ambient temperature for operation
1 ℉ … 140 ℉
(−17 ℃ …
60 ℃)
Storage temperature
−4 ℉ … 104 ℉
(−20 ℃ …
40 ℃)
Battery charging starting temperature
14 ℉ … 113 ℉
(−10 ℃ …
45 ℃)
5 Operation
5.1 Charging the battery
1. Before charging the battery, read the operating instructions for the
charger.
Printed: 05.06.2019 | Doc-Nr: PUB / 5293030 / 000 / 04