Operating Instruction ST 1800 A22 (01)

English 11
@
Control switch
;
Forward / reverse switch
=
Lockbutton
%
Grip
&
Pressure transfer surface
(
Battery interface
)
Torque adjustment
+
Chuck
§
Protective cap
/
Release button with additional
function (charge status display
activation)
:
Depth gauge
∙
Depth gauge adjustment
3.2 Intended use
The product described is a hand-held cordless screwdriver for fastening
profile metal sheets, metal sheets and sandwich panels in metal construction.
The product is designed for driving and removing self-drilling and self-
tapping screws in appropriate materials and material thicknesses.
It is possible to use a stand-up tool for driving collated screws.
▶ Use only Hilti Liion batteries from the B 18 / B 22 series with this product.
▶ Use only Hilti battery chargers of the C4/36 series with these batteries.
3.3 Items supplied
Metal construction screwdriver, STDG 19 depth gauge, STDC protective
cap, SNSD 8 screwdriving bit, operating instructions.
Spare parts, consumables and accessories approved by Hilti for use
with the product can be found at your local Hilti Store or online at:
www.hilti.group.
3.4 Liion battery display
The charge status of the Li-ion battery and malfunctions of the power tool are
indicated by the display on the Liion battery. The charge status of the Liion
battery is displayed after pressing one of the two battery release buttons.
Status Meaning
4 LEDs light. Charge status: 75 % to 100 %
3 LEDs light. Charge status: 50 % to 75 %
2 LEDs light. Charge status: 25 % to 50 %
1 LED lights. Charge status: 10 % to 25 %
1 LED blinks, the power tool is
ready for use.
Charge status: < 10 %
1 LED blinks, the power tool is not
ready for use.
The battery has overheated.
4 LEDs blink, the power tool is not
ready for use.
The power tool is overloaded or has
overheated.
Printed: 05.06.2019 | Doc-Nr: PUB / 5293030 / 000 / 04