Operating Instruction ST 1800 A (01)

Table Of Contents
8 English 2153707
*2153707*
Status Meaning
4 LEDs light. Charge status: 75 % to 100 %
3 LEDs light. Charge status: 50 % to 75 %
2 LEDs light. Charge status: 25 % to 50 %
1 LED lights. Charge status: 10 % to 25 %
1 LED blinks, the power tool is
ready for use.
Charge status: < 10 %
1 LED blinks, the power tool is not
ready for use.
The battery has overheated.
4 LEDs blink, the power tool is not
ready for use.
The power tool is overloaded or has
overheated.
Battery charge state cannot be displayed while the control switch is
pressed and for up to 5 seconds after releasing the control switch. If
the battery display LEDs blink, please observe the instructions given in
the Troubleshooting section.
4 Technical data
4.1 Cordless metal screwdriver
Rated voltage
21.6 V
DC
Weight
6.8 lb
(3.1 kg)
Rated speed under no load
33.3 Hz
(2,000 /min)
Torque
9 ftlb
f
(12 Nm)
Socket/bit drive
1
/
4
hex. socket
with locking ring
Operating temperature
1 140
(−17
60 ℃)
Storage temperature range (without battery)
−4 158
(−20
70 ℃)
4.2 Battery
Battery operating voltage
21.6 V
Ambient temperature for operation
1 140
(−17
60 ℃)
Printed: 05.06.2019 | Doc-Nr: PUB / 5293039 / 000 / 04