COLA RR 26176 Seismic Components Approval Document

Hilti, Inc.
Re: MQS-SP, MQS-SP-L, MQS-SP-T, MQS-IB Bracing, and Seismic Brace System
RR 26176
Page 4 of 9
The approval is subject to the following conditions:
1. Installation shall comply with this general approval, the manufacturer’s published
instructions and the 2020 Los Angeles Building Code.
2. The products described in this report shall be identified with the Hilti name engraved
in each piece along with the model number and lot lumber. The box of clamps/braces
shall be identified with the Los Angeles Research Report Number, LARR 26176.
3. The design and connection of the clamps, connectors and brackets to the main structure
shall be completed by a licensed architect or engineer registered in the State of
California.
4. The products are manufactured in Tuzla/Istanbul, Turkey under a quality control
program with audits by FM Global.