Use and Care Manual
Table Of Contents
- Original operating instructions
- 1 Information about the documentation
- 2 Safety
- 3 Description
- 4 Technical data
- 5 Before use
- 6 Operation
- 6.1 Operation without use of the power outlet on the appliance
- 6.2 Operation with use of the power outlet on the appliance
- 6.3 Picking up dry dust
- 6.4 Picking up liquids
- 6.5 After use of the vacuum cleaner
- 6.6 Emptying dry dust from the waste material container
- 6.7 Emptying the waste material container when no dust bag is fitted (picking up liquids)
- 7 Care, maintenance, transport and storage
- 8 Troubleshooting
- 9 Disposal
- 10 Manufacturer’s warranty
- Mode d'emploi original
- 1 Indications relatives à la documentation
- 2 Sécurité
- 3 Description
- 4 Caractéristiques techniques
- 5 Mise en service
- 6 Utilisation
- 6.1 Fonctionnement sans utilisation de la prise de l'appareil
- 6.2 Fonctionnement avec utilisation de la prise de l'appareil
- 6.3 Aspiration de poussières sèches
- 6.4 Aspiration de liquides
- 6.5 Après aspiration
- 6.6 Vidage de la cuve de récupération de saletés en cas de poussières sèches
- 6.7 Vidage de la cuve de récupération de saletés sans sac à poussières (en cas d'aspiration de liquides)
- 7 Nettoyage, entretien, transport et entreposage
- 8 Aide au dépannage
- 9 Recyclage
- 10 Garantie constructeur
- Manual de instrucciones original
- 1 Información sobre la documentación
- 2 Seguridad
- 3 Descripción
- 4 Datos técnicos
- 5 Puesta en servicio
- 6 Manejo
- 6.1 Funcionamiento sin uso de la toma de corriente del aspirador
- 6.2 Funcionamiento con uso de la toma de corriente de la herramienta
- 6.3 Aspiración de polvo seco
- 6.4 Aspiración de líquidos
- 6.5 Después de aspirar
- 6.6 Vaciado del depósito de suciedad con polvo seco
- 6.7 Vaciado del depósito de suciedad sin saco para polvo (con líquidos)
- 7 Cuidado, mantenimiento, transporte y almacenamiento
- 8 Ayuda en caso de averías
- 9 Reciclaje
- 10 Garantía del fabricante
- Manual de instruções original
- 1 Indicações sobre a documentação
- 2 Segurança
- 3 Descrição
- 4 Características técnicas
- 5 Antes de iniciar a utilização
- 6 Utilização
- 6.1 Trabalhar sem o aparelho utilizando a tomada embutida no aparelho
- 6.2 Trabalhar com o aparelho utilizando a tomada embutida no aparelho
- 6.3 Aspirar pós secos
- 6.4 Aspirar líquidos
- 6.5 Após a aspiração
- 6.6 Esvaziar o contentor em caso de pós secos
- 6.7 Esvaziar o contentor sem saco colector do pó (no caso de líquidos)
- 7 Conservação, manutenção, transporte e armazenamento
- 8 Ajuda em caso de avarias
- 9 Reciclagem
- 10 Garantia do fabricante
English 11
Trouble or fault Possible cause Action to be taken
The motor doesn’t restart. The motor overheating protection
cut-out has been activated.
▶ Switch the appliance off and
allow it to cool down for about
5 minutes.
▶ If the motor doesn’t start, return
the appliance to Hilti Service.
The motor is repeatedly switched
off by its thermal cut-out.
▶ Clean the air vents carefully
using a dry brush.
The motor doesn’t run when
set to “AUTO”.
The appliance is faulty or is not
correctly plugged in.
▶ Make sure that the supply
cord plug is fully plugged in
and check that the appliance
functions correctly.
The automatic filter element
cleaning system doesn’t
work.
No suction hose is connected. ▶ Connect the suction hose.
9 Disposal
Most of the materials from which Hilti products are manufactured can be recycled. The materials must be
correctly separated before they can be recycled. In many countries, your old tools, machines or appliances
can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative for further information.
Drilling slurry
Disposal of drilling slurry directly into rivers, lakes or the sewerage system without suitable pretreatment
presents environmental problems.
▶ Ask the local public authorities for information about current regulations.
We recommend the following pretreatment:
▶ Collect the drilling slurry (for example, using a wet-type vacuum cleaner).
▶
Allow the drilling slurry to settle and dispose of the solid material at a construction waste disposal site
(addition of a flocculent may accelerate the settling process).
▶ The remaining water (alkaline, pH value greater than 7) must be neutralized by the addition of an acidic
neutralizing agent or diluted with a large volume of water before it is allowed to flow into the sewerage
system.
Drilling dust
▶ Dispose of the drilling dust collected by the vacuum cleaner in accordance with the applicable national
regulations.
10 Manufacturer’s warranty
▶ Please contact your local Hilti representative if you have questions about the warranty conditions.
Printed: 22.02.2017 | Doc-Nr: PUB / 5334126 / 000 / 00