Instructions

Network Dome Camera·Quick Start Guide

Back Box

Secure the Camera Figure 2-4

Note:

● The supplied screw package contains self-tapping screws,

and expansion bolts.

● For cement ceiling, use expansion bolts to secure the

camera. For wooden ceiling, use self-tapping screws

5. Connect the corresponding cables, such as power cord and

network cable.

6. Power on the camera, and set the network configuration (for

details, refer to 3 Set the Network Camera over the LAN and 4

Access via Web Browser) to check whether the image is gotten

from the optimum angle. If not, adjust the surveillance angle (for

details, refer to 2.3.1 3-Axis Adjustment).

7. Install the inner black liner back to the camera.

8. Install the bubble back to the camera and secure it with screws.