Instructions

Network Bullet Camera·Quick Start Guide

2. Drill the screw holes and the cable hole (optional) in the

wall/ceiling according to the drill template.

Note:

Drill the cable hole, if adopting ceiling outlet to route the cable.

Screw

Hole

Cable Hole

3 - Φ 4 mm

Φ 70 mm

Figure 2-4 The Drill Template

3. Take apart the junction box, and align the screw holes of the bullet

camera with those on the junction box’ cover.

4. Fix the camera on the junction box’s cover with three PM4 × 10

screws.

Junction Box

Cover

Figure 2-5 Fix the Camera on Junction Box’s Cover

5. Secure the junction box’s body with three supplied screws on the

wall.