Instructions

Digital Video Recorder Quick Start Guide
10
The HiLookVision can be enabled via operation on SADP software, GUI and Web browser. We introduce the
operation steps on GUI in this section.
Step 1 Go to Menu > Configuration > Network > Platform
Access.
Figure 3-9 HiLookVision Settings
Step 2 Check the Enable checkbox to activate the function.
Then the Service Terms interface pops up.
1) Enter the code in Verification Code.
2) Check The HiLookVision service will require
internet access. Please read Service Terms and
Privacy Statement before enabling the service if
you agree the service terms and privacy statement.
3) Scan the QR code on the interface to read the
Service Terms and the Privacy Statement.
4) Click OK to save the settings.
Figure 3-10 Service Terms

HiLookVision is disabled by default.

The verification code is empty by default. It must contain 6 to 12 letters or numbers, and it is case
sensitive.
Step 3 (Optional) Check Custom and enter the Server
Address.
Step 4 (Optional) Check Enable Stream Encryption.
After this feature is enabled, the verification
code is required for remote access and live view.
You can use the scanning tool on your smartphone to
download the smartphone app or add the device by
scanning the QR code.
Figure 3-11 HiLookVision Settings
Step 5 Click Apply to save the settings.
Please refer to the help file on the official website and the HiLookVision Mobile Client User Manual for adding
the device to HiLookVision and more operation instructions.
3.9 Live View
Icons are provided on screen in Live View mode to indicate camera status. These icons include:
Live View Icons