Instructions

Digital Video Recorder Quick Start Guide
9
3.7 Adding IP Cameras(NVR)
Purpose
Before you can get live video or record the video files, you should add the network cameras to the connection
list of the device.
Before you start
Ensure the network connection is valid and correct, and the IP camera to add has already been activated. Please
refer to the User Manual for activating the inactive IP camera.
Step 1 Go to Menu > Camera > IP Camera.
Step 2 Select the IP camera from the list and
click to add the camera (with the
same admin password of the NVR’s).
Step 3 (Optional) Check Enable H.265 (For
Initial Access) for the connected IP
camera supporting H.265. Then the IP
camera will be encoded with H.265.
Figure 3-7 Add IP Camera
3.8 Network Settings
3.8.1 Configuring General Settings
Purpose
Network settings must be properly configured before you operate DVR/NVR over network.
Step 1 Go to Menu > Configuration >
Network > General.
Step 2 Configure the general parameters of
network.
Step 3 Click Apply to save the settings.
Figure 3-8 Network Settings
3.8.2 Configuring HiLookVision
Purpose
HiLookVision provides the mobile phone application and the service platform page to access and manage your
connected DVR/NVR, which enables you to get a convenient remote access to the surveillance system.