HILO XL Complete Specs

HILO Mirror
5
Connection
Connect to power
6
Others
Notes
1. Use only original power cable that comes with the Smart Mirror.
2. Keep power cable in good shape and condition.
3. In any case of malfunction, unplug Smart Mirror immediately.
4. Unplug the Smart Mirror if you won't be using it for a long time.
1. Connect Mirror to power as shown above.
2. Once successfully connected, touch button below display area is RED.
Connect to USB device
USB drive
Portable hard drive
In any case of malfunction, before sending Smart Mirror for maintenance, please read the
following instructions and solution.
Troubleshooting
Troubleshooting is only for users who are facing major operating issues on Smart mirror. If
users should have problems with specific functional page, please go to your retailer to get
user manuals on specific functions.
Couldn't start up Smart Mirror
1. Check if power jack is loose.
USB
Insert USB drive or portable hard drive to Mirror through USB port.
Note: Please do NOT insert USB devices to OTG port.
No image/sound or bad display
1. Make sure settings are properly adjusted
2. Call your supplier.
12 13
Power
socket(
110v
)
Power
cable