User Manual

2
Chapter 1 Introduction | Hillstone
Hillstone Multi-core Security Appliance Installation Manual
faced by traditional appliances when multiple functionalities are running
simultaneously.
Modular Design
Some models of Hillstone SG-6000 series support expansion modules. There are
two kinds of pluggable hardware expansion modules: I/O module and storage
module. The modular design greatly protects customer’s investment.
 The I/O module enhances the connectivity of the device, so that the device
will not be obsolete when the network develops.
 The storage module is used to store logs and statistics collected by the device.
Multiple Network Access Technologies
Some models of Hillstone SG-6000 series have built-in 3G communication module,
which supports WCDMA, CDMA2000, and TD-SCDMA. The maximum downloading
rate can reach 21Mbps. Besides, these models support the WAN access mode, such
as ADSL, PPoE, and dedicated line. With WAN access mode and 3G communication
module, you can implement link redundancy and load balancing.
Support 802.11a/b/g/n WLAN access standards, use double MIMO antenna
technology, support up to 300Mbps wireless network connection rate, provide 9
Gigabyte Ethernet ports. Meanwhile, support the flexible WLAN access management
technology, such as the user limit of SSID, user security isolation, and QoS traffic
management.
Hardware Overview
Hillstone multi-core security appliances are designed to fit in standard 19-inch
cabinets/racks. A security appliance can be installed in a cabinet/rack or placed on
a workbench.
Front Panel
The front panel of SG-6000-G5150 consists of 4 Gigabit Ethernet ports, 8 SFP ports,
1 USB port, 1 Console port, 1 Auxiliary port, 1 CLR button, 4 general expansion
slots, some LED indicators and 1 fan tray. Figure 1-1 illustrates the front panel of
SG-6000-G5150.