User Manual

37
Chapter 3 Installation | Hillstone
Hillstone Multi-core Security Appliance Installation Manual
2. Insert the SIM card into the SIM card slot at the back panel of the device.
Notes:
 The security appliance of SG-6000-E1100 (WLAN version) only supports
the external 3G data card. Before using the 3G function, insert the 3G data
card with a SIM card into the USB port at the back panel of the device.
 SIM card cannot be hot-swappable. Before installing or replacing the SIM
card, power off the device. After installing the SIM card, you can power on
the device.
 3G data card and SIM card must match the network type.
Verifying Installation
After you complete the installation with all the above steps, you still need to verify
the following items.
 All the cables are properly connected.
 The grounding wire of the appliance is correctly connected.
 The air vents on both side panel of the appliance are unblocked, and there is
enough space around for heat dissipation.
 The expansion modules, power supply modules and fan tray are correctly
installed (for some products).
 The power source meets the requirements of the appliance.
 If the appliance is rack-mounted, make sure the rack is stable enough. If the
appliance is placed on a workbench, make sure the workbench is stable and
clean.