User Manual

36
Chapter 3 Installation | Hillstone
Hillstone Multi-core Security Appliance Installation Manual
Figure 3-4: 3G Antenna and WLAN Antenna
To install antennas for SG-6000-E1100 (WLAN version), SG-6000-E1100 (3G
version), or SG-6000-E1100 (WLAN+3G version), take the following steps:
1. According to the function you use, select the corresponding antenna.
2. Install the antenna to the SMA connector at the back panel of the device by
rotating the antenna clockwise.
Figure 3-5: Antenna Installation Illustration
Note: Each type of antenna must be installed into the corresponding SMA connector.
The 3G antenna must be installed into the connector of 3GDIV and 3GMAIN. The WLAN
antenna must be installed into the connector of and .
Installing the SIM Card
To install the SIM card for SG-6000-E1100 (3G version) or SG-6000-E1100
(WLAN+3G version), take the following steps:
1. Purchase the SIM card from the ISP and activate the data connection service.