User Manual

16
Chapter 1 Introduction | Hillstone
Hillstone Multi-core Security Appliance Installation Manual
on
normal status.
Off
The link between this port and its peer device has
failed.
ACT
Orange/Blinking
The port is sending or receiving data.
Off
No data is transmitted on this port.
e0/0-
e0/8
Green/Always
on
The link between this port and its peer device is in
normal status.
Green/Blinking
The port is sending or receiving data.
Off
There is no connection between this port with the its
peer device, or the link between this port and its peer
device fails.
3G
Green/Always
on
The device discovers the built-in 3G Express module.
Green/Blinking
The 3G module is sending or receiving data.
WLAN
Green/Always
on
The device discovers the built-in WLAN module.
Green/Blinking
The WLAN module is sending or receiving data.
Table 1-18: Front Panel LED Descriptions
Notes:
 The STA and ALM LEDs will both turn red when there is a boot failure
caused by OS software damage. Contact your sales representative if this
occurs.
 As the number and type of LED indicators may vary from different product
models, please refer to the actual product.
System Parameters
Table 1-9 lists the system parameters of Hillstone multi-core security appliances of
all models.
Item
Description
Fixed Ports
SG-6000-G5150
4 Gigabit Ethernet ports
8 SFP ports
1 USB 2.0 Host port
1 Console port
1 Auxiliary port
SG-6000-G2120
4 Gigabit Ethernet ports
4 SFP ports
1 USB 2.0 Host port
1 Console port
1 Auxiliary port
SG-6000-M8860
SG-6000-M7260
4 Gigabit Ethernet ports
4 SFP ports
1 USB 2.0 Host port
1 MGT port
1 HA port
1 Console port
1 Auxiliary port