User Manual

Hillstone Hardware Reference Guide
Off
There is no connection between this port with the its
peer device, or t
he link between this port and its
peer device fails.
WLAN
Green/Always
on
The device discovers the built-in WLAN module.
Green/Blinking The WLAN module is sending or receiving data.
Notes:
♦ The STA and ALM LEDs will both turn red when there is a boot failure
caused by OS software damage. Contact your sales representative if this
occurs.
♦ As the number and type of LED indicators may vary from different
product models, please refer to the actual product.
System Parameters
The following table lists the system parameters of Hillstone devices of all models.
Table 1-4: System Parameters
Item Description
Interface
SG-6000-E1100 (WLAN version)
9 Gigabit Ethernet ports
1 USB 2.0 Host port
1 Console port
CPU
Dedicated 64-bit multi-core
processor
DDR SDRAM
SG-6000-E1100 (WLAN version)
1 GB
Flash Memory
SG-6000-E1100 (WLAN version)
512 MB
Size
SG-6000-E1100 (WLAN version)
320.0mm x 150.0mm x
44.0mm
SG-6000-E1100 (WLAN version)
Net weight: 1.5 kg
Gross weight: 2.0 kg
(accessories and packages
included)
SG-6000-E1100 (WLAN version)
30 W
Input Voltage
AC 100-240V AC, 50/60Hz
DC -40 - -60V DC
Ambient Temperature
0℃-40℃
Relative Humidity 10%-95% (non-condensing)
Note: DDR SDRAM is the random access memory to store the communication
data for the CPU. Flash Memory is used for storing the operating system
firmware, configuration and application files.
4
Chapter 1 Introduction
| Hillstone