User's Manual

19
Chapter 1 Introduction | Hillstone
Hillstone Multi-core Security Appliance Installation Manual
SG-6000-E1100 (WLAN version)
SG-6000-E1100 (3G version)
SG-6000-E1100 (WLAN+3G
version)
Gross weight: 2.0 kg
(accessories and packages
included)
Power Rating
SG-6000-G5150
SG-6000-M8860
SG-6000-M7260
450 W (x 2)
SG-6000-G2120
150 W x 2
SG-6000-M3108
SG-6000-M3100
SG-6000-E2800
SG-6000-E2300
SG-6000-E1700
45 W
SG-6000-M1600
15 W
SG-6000-E1600
SG-6000-E1100 (WLAN version)
SG-6000-E1100 (3G version)
SG-6000-E1100 (WLAN+3G
version)
30 W
Input Voltage
AC
100-240V AC, 50/60Hz
DC
-40 - -60V DC
Ambient Temperature
0℃-40℃
Relative Humidity
10%-95% (non-condensing)
Table 1-19: System Parameters
Note: DDR2 SDRAM is the random access memory to store the communication
data for the CPU. Flash Memory is used for storing the operating system
firmware, configuration and application files.
Ports
This section introduces attributes of interfaces (ports) on the Hillstone devices,
including console port, auxiliary port, USB port, gigabit copper port, SFP port and
XFP port.
Console Port
Hillstone multi-core security appliance provides an RS-232C asynchronous serial
console port for you to configure the appliance. Attributes for the console (CON)
port are shown in Table 1-10.