User's Manual

14
Chapter 1 Introduction | Hillstone
Hillstone Multi-core Security Appliance Installation Manual
No.
Label
No.
Label
No.
Label
1
SMA connector
for 3G antenna
4
CON: Console port
7
e0/0 - e0/8: Gigabit
Ethernet port
2
DC POWER: DC
power interface
5
SIM: SIM card slot
8
Security keyhole
3
CLR： CLR
button
6
USB: USB port
9
SMA connector for
3G antenna
Table 1-16: Back Panel Description of SG-6000-E1100 (3G version)
SG-6000-E1100 (WLAN+3G version) uses the power adapter. The back panel of
SG-6000-E1100 (WLAN+3G version) has 1 power supply socket, 1 Console port, 1
CLR button, 9 Gigabyte Ethernet ports, 1 USB port, 1 grounding screw, 1 security
keyhole, 2 SMA connectors for 3G antennas, and 2 SMA connectors for WLAN
antennas. Figure 1-25 illustrates the back panel of this model.
Figure 1-25: SG-6000-E1100 (WALN+3G version) Back Panel
No.
Label
No.
Label
No.
Label
1
SMA connector
for 3G antenna
5
SIM: SIM card slot
9
Security keyhole
2
DC POWER: DC
power interface
6
SMA connectors for
WLAN antennas
10
SMA connector for
3G antenna
3
CLR： CLR
button
7
USB: USB port
-
-
4
CON: Console
port
8
e0/0 - e0/8: Gigabit
Ethernet port
-
-
Table 1-17: Back Panel Description of SG-6000-E1100 (WLAN+3G version)
LED Indicators
Table 1-8 describes the meanings of LED indicators on the front panels of Hillstone
multi-core security appliances.
LED
Color/Status
Description
PWR
Green/Always
on
The device power is running normally.
Orange/Always
on
The device power is running abnormally.
Red/Always on
Power failure so the system is down.