Reference Guide

26
Chapter 5 Hardware Maintenance and Replacement
Introduction
This chapter explains startup and shutdown methods of the Hillstone A200-Series device.
Startup
After being connected to the power supply by the power cord for the first time, the device will
automatically start up. If the device is shut down by pressing the power button or using the
shutdown command, and the power cord has not been disconnected after shutdown, you can press
the power button to power on the device. After that, check if the PWR LED on the front panel is
on. A solid green LED indicates correct connection.
Shutdown
If you stop using the equipment, you can do it by the following methods:
The device has no shutdown button, and can directly disconnect AC220V or DC12V for power
down.