Reference Guide

Installing the SIM Card

To install the SIM card for A200 (4G\WLAN+4G version), take the following steps:

1. Purchase the SIM card from the ISP and activate the data connection

service.

2. Insert the SIM card into the SIM card slot at the back panel of the device.

Note: 4G data card and SIM card must match the network type.

Verifying Installation

After you complete the installation with all the above steps, you still need to verify the following items.

 All the cables are properly connected.

 The air vents on both side panel of the device are unblocked, and there is enough space around

for heat dissipation.

 The power source meets the requirements of the device.

 If the device is rack-mounted, make sure the rack is stable enough. If the device is placed on a

workbench, make sure the workbench is stable and clean.

Note: Each type of antenna must be installed into the corresponding SMA connector. The 4G

antenna must be installed into the connector of 4GDIV and 4GMAIN. The WLAN antenna must be

installed into the connector of and .

SIM card

SIM Card

Holder

Equipment