Reference Guide

13
Attribute
Description
Short-haul
Multimode
Optical
Module
(850nm)
Medium-
haul Single-
mode
Optical
Module
(1310nm)
Long-haul
single-
mode
optical
module
(1310nm)
Medium-
haul Single-
mode
Optical
Module
(1310nm)
Long-haul
Single-
mode
Optical
Module
(1310nm)
Long-haul
Single-
mode
Optical
Module
(1550nm)
Ultra-long-
haul Single-
mode
Optical
Module
(1550nm)
Maximum
Transmission
Distance
0.3km
80km
Central
Wavelength
850nm
1310nm
1310nm
1550n
m
1550nm
1310nm
1550nm
1550nm
Optional Original
Hillstone Optical
Module
TRAN-SX
TRAN-
LX10
TRAN-
LX40
TRAN-
LX80
TRAN-
LX40
TRAN-
LX80
Notes: The original Hillstone optical module should not be used together with optical modules
from other manufacturers, otherwise some errors may occur.
If an SFP copper module is applied to an SFP port, you should use a crossover or straight-through
cable (i.e. standard Ethernet cable). Attributes for the SFP copper module are shown in the table
below:
Table: SFP Copper Module Attributes
Attribute
Description
Connector
RJ-45
Port Standard
Auto-MDI/MDIX (crossover cable and straight-through cable
autosensing)