Instructions / Assembly

7
ASSEMBLY INSTRUCTIONS
4
4-1. Load Cylinder Housing (D) onto Pole.
Slide Cylinder Housing down.
4-2. And then put the Deck Ring (PP) through the Post
and on the top of the Cylinder Housing.
5. Attach three Reflector Spacers (EE) and three
Washers Φ8 (FF) to the top of Head Assembly (C).
Tighten the Reflector Spacers.
EE
FF
x 3
Reflector Spacer
x 3
Hardware Used
5
D
C
EE
PP
FF
6. Unscrew Stainless Steel Bolts M6 X 10 (CC) from
Head Assembly.
6
Hardware Used
CC
x 4
Stainless Steel Bolt M6 X 10
CC